Scale Model Structures and Parts

Pine Canyon Scale Models


About Us

Order - Contact Us


Our S-scale Dealers

S-scale Kits

S-scale Parts

O-scale Kits

O-scale Parts


Driftwood Stain

See how easy it is to build a Pine Canyon kit.

Customer Photos

Diorama Clinic

Favorite Links

Parts Page 2, S-scale 1/64

Our detail parts and mini-kits are produced from high quality polyurethane tooling resin.  Some mini-kits include water-slide decals.  We are the original creator of these parts.  To insure the cleanest castings, insist on genuine Pine Canyon parts.

Our shipping calculator starts at $4, so it is most economical to order 3 or more detail parts in one lot.

Our individual parts are available direct only.  They are not packaged for dealer display.

To parts page 1    To parts page 3.

Click on Images for Large Photo

Back To S-scale Kits Page

Hazmat Pile #632  Footprint 3-7/8" long. Price $7


Hazmat Workbench #633 Footprint 4-1/2" long. Price $10


Dining Counter with 10 Stools #504 This is the same counter provided in our drive-in kit. Footprint 4-3/4 x 13/16 inches.  Price $12


Kitchen for Diner #505 This is the same kitchen provided in our drive-in kit. Footprint 2-3/16 wide x 9/16 deep x 2-3/16 inches tall.  Price $7
Soda Machine Kit #325, S-Scale replica of a 1954 Vendo machine.  This machine can be backdated to approximately 1948 by removing half of the release lever.  This mini-kit includes a decal sheet which features many soda types, so the machine can be other than just Coke.  Price $5.
Soda Machine, Chest Type Kit #326 S-scale replica of a 1940s Glasco Soda Machine.  Price $6.
Roof Entry Shed, concrete style #341 Footpring 2" x 1"     Price $6


Steps Set of 2, wooden style #515 Access to 3/4 inch height, Price $4
Steps set of 2, concrete style #549 Access to 3/4 inch height, Price $4


Machine Junk Pile Unpainted Casting #629 Footprint 3-1/2 x 2-1/8 inches.  Price $8


Boiler, Unpainted Casting #630 Footprint 1-1/8 at the base x 3-3/4 inches high.   Figures not included. Price $10
Jib Crane Kit #8007

Injection molded in gray styrene.  2-1/4 inches tall.  1-1/2 inch reach from center to center.  Price $5.

Tower with flat roof #506 This is the same tower supplied in our Toxic Terminal kit. Price $8

To parts page 1    To parts page 3.